最新2048入口,东方影库域名www第一步

Contact Us | Add to Favorites | Traditional Chinese
Professional cleaning service
Carpet cleaning service
Exterior wall cleaning services
Stone renovation and maintenance
Various service quotes
Contact: Mr. Liu
Phone: 086-021-52857297
24 hours electricity: 086-021-52857297
Company Address: No. 300 Taopu Road, Putuo District, Shanghai
Postal Code: 200333
Website: estudioefe.com
Contact email: manager@estudioefe.com

Stone is widely used as a decorative material for paving floors and walls. Due to installation, use, etc., or over time, joint frying, irreversible pollution of the surface layer, and abrasion and tarnishing will occur. For the clean and bright surface Stone is very susceptible to oil and water pollution.
The stone department of Fulin Procter & Gamble Company relies on professional technology and advanced equipment, and can adopt different methods according to different stone renovation and maintenance needs, so that the surface of your stone can achieve the bright beauty without changing the pattern and color.

Standard construction procedures

Judgment of slab surface condition-> "refurbishment and maintenance machinery" to be invested-> "grinding method" decided to implement-> selecting the most appropriate "grinding consumables"-> to meet the construction standards

Natural marble is also known as marble. Its main components are calcium carbonate and magnesium, sodium, silicon, etc. The Mohs hardness value is about 4.5, which is soft. Weathering resistance is poor, so we can choose light, moderate and deep stone renovation and maintenance according to the surface wear of the stone.

Crystallization of stone
--- Stone floor is an indispensable main material for modern decoration. Especially natural stone is favored by consumers with its natural and beautiful characteristics. However, no matter how carefully natural stone is used, it will be scratched to varying degrees after a period of time, and gradually lose its luster, which greatly affects the original beauty of the stone surface. Replacement or refurbishment is costly. If the ground damage is not particularly serious, the above approach should not be taken. As the first generation of stone care technology, wax is still widely used today. This technology relies on water-swelling low-molecular plastic materials to form a covering layer on the surface of the stone to protect the substrate. However, the hardness is low, and it is easy to change color. It must be polished and waxed frequently, which consumes huge resources. In the waxing process, a black waxing pad containing alloy sand is used to seriously damage the surface of the stone. It penetrates into the stone and forms cracks. With the development of new technologies, the first generation technology will reduce the use.

Marble, granite and other crystallization operation procedures
I. Construction plan: 1. First, thoroughly clean the surface of the marble using a scrubber; 2. Adjust the crystal powder into paste with pure water and apply it on the polishing pad. 3. Use a 175 RPM scrubber with a load of 45KG to start grinding. Keep the floor moist during operation. 4. After the surface of the marble is formed into a high-gloss crystal surface, use a water suction machine to suck up the residual paste on the ground. 5. Dry with water; 6. Polish with a polishing pad to make the ground completely dry and bright like a mirror.
Second, the effect: Applied to the hard treatment of marble crystal surface, to protect the stone surface from general scratches, to maintain a bright mirror surface, waterproof, anti-corrosion, easier to care than waxing. This solution is a wet operation, which recreates the high-gloss crystal surface of the stone in the shortest time, and is used to treat the stone surface that has lost its luster due to wear and other reasons.
Third, characteristics: 1, will not cause stone surface scratches caused by steel wool; 2, will not make the stone surface discoloration or leave yellow rust. 3. The stone surface is as bright as water, which is very layered. 4, low cost, time and labor. 5. It has the effects of preventing stains from penetrating into the inner layer of stone, enhancing anti-wear and anti-scratch.

Comparison of crystallization and waxing

crystallization Waxing
Steps Wash the floor, blow dry, and use it with a single wiper; Bottom wax blow dry (2 times), surface wax blow dry with high speed polishing;
2. Texture Crystal hard Waxing is softer;
3.Brightness The crystal is as bright as a mirror;

Waxing in general;

4, hydrophilic Strong water resistance, no softness and no volume;

Absorbs moisture and tends to soften and roll up;

5, the number of operators Crystallized 1-2 people;

Waxing 3-4 people;

 


Links: Video Surveillance System | Shanghai Waste Sorting | Needle Detector | Ningbo Logistics Company | Zhoushan Logistics Company | Hangzhou Fuyang Logistics Company | Shanghai Large Piece Logistics | Needle Detector | Fume Pipe Cleaning | Deqing Logistics Company | Suzhou Logistics | Shanghai Gifts Packaging box | Needle checking machine | Shaoxing to Linyi Changzhou logistics company | Ningbo to Wuhan logistics company | Suzhou logistics company | Shaoxing logistics company | Taicang to Shenzhen logistics line | Ningbo to Guangzhou logistics company | Shanghai oil fume pipeline cleaning | Vacuum pump repair | Jiangmen Logistics Company | Ningbo Logistics Transport Company | Ningbo Logistics Company |
Copyright Shanghai Haojie Cleaning Co., Ltd. Copyright ? 1998-2013 All Rights Reserved

Shanghai Public Network Security No. 31010702003824

上海微精科技 Technical Support: Shanghai Weijing Technology
沪 ICP 备 05040532 号 -1